[Empeg-general] Re: wowo help please tony? someone ahh..

[justinlarsen@empegbbs-noreply.merlins.org]

unplugged the second hard drive and running how it came when i bought it and getting this, 

hda: , ATA DISK drive
hda: no response (status = 0xd4)
hda: no response (status = 0xd4)
hda: no response (status = 0xd4)
ide0: unexpected interrupt, status=0xd4, count=1
ide0 at 0x000-0x007,0x038 on irq 6
hda: , 0MB w/2kB Cache, CHS=4/4/4
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu)

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:26:08:7
b
Partition check:
 hda:hda: status timeout: status=0xd4 { Busy }
hda: drive not ready for command