[Empeg-general] Re: Ethernet

[silamanajik@empegbbs-noreply.merlins.org]

1. Get a network card and put it in while your computer is shut off.
2. Turn on your computer and XP should have a driver for it, or install the driver from the disk it came with.
3. If you already have one installed, great.
4. Get a network CAT5 crossover cable, or make one if you have the capability, plug it into the computer and into the empeg.
5. Power up the empeg, open emplode, hit options and select "network broadcast", hit OK.
6. It should find your player and now your on your way.