[Empeg-technical] Re: Home wireless connections

[Sven Mueller]

Hi.

Did you setup the WET11 correctly? Especially the WEP setting needs to be correct, otherwise it won't get a link to the AP. This means that the bit width needs to be the same on AP and WET11, and of course the key itself needs to be correct.
Try connecting a PC to the WET11 instead of the empeg and check the settings with that. You could also try to remove WEP security from your AP.
And don't forget to set the right SSID. On some devices, you also need to set the right channel. Also: Did you set up any MAC address filtering on the AP?

cu,
sven