[Empeg-technical] strange HDD error...i think

[Phoenix42 at empegbbs-noreply.merlins.org]

is this error releted to a dying HDD or a bad cable?

<pre>hda4 is mounted.
hda: irq timeout: status=0xd0 { Busy }
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
end_request: I/O error, dev 03:06 (hda), sector 12
hda: status timeout: status=0xd0 { Busy }
hda: drive not ready for command
ide0: reset: success</pre>

I also go this error when i tried to do a fsck
<pre>Flags: nzcv  IRQs on  FIQs on  Mode USER_32  Segment user
Control: D03AD17D  Table: D03AD17D  DAC: 00000015
init(1): memory violation at pc=0x00000000, lr=0x02007140 (bad address=0x0000000
0, code 2)
pc : [<00000000<]    lr : [<02007140<]
sp : 00000000  ip : bffffd88  fp : 00000000
r10: bffffe98  r9 : 00000000  r8 : 0203d938
r7 : bffffdac  r6 : 0202ed90  r5 : 00000015  r4 : 00000000
r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : 00000015</pre>