[Empeg-technical] No hard disk found, Contact support

misaochankun at empegbbs-noreply.merlins.org misaochankun at empegbbs-noreply.merlins.org
Wed Apr 30 15:55:00 PDT 2003


This morning, I was greeted to this as I put in the empeg.
I can hear the hard drive spinning up and such, and I hear nothing loose inside. Below is the serial port output.
In the past I had to replace the hard drive cable due to that batch of bad cables, it has been fine otherwise:


empeg-car bootstrap v1.02 20001106 (hugo at empeg.com)                                                   
If there is anyone present who wants to upgrade the flash, let them speak now,                                                                              
or forever hold their peace...it seems not. Let fly the Penguins of Linux!                                                                          

e000 v1.04          
Copying kernel...                 
Calling linux kernel...                       
Uncompressing Linux..................................... done, booting the kerne                                                                                
l.  
Linux version 2.2.14-rmk5-np17-empeg52 (rob at aphex) (gcc version 2.95.3 20010315                                                                               
(release)) #11 Tue Apr 1 18:49:59 BST 2003                                          
Processor: Intel StrongARM-1100 revision 11                                           
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.                                                                       
empeg-car player (hardware revision 9, serial number 10101910)                                                              
Command line: mem=16m                     
Calibrating delay loop... 207.67 BogoMIPS                                         
Memory: 15024k/16M available (964k code, 20k reserved, 372k data, 4k init)                                                                          
Dentry hash table entries: 2048 (order 2, 16k)                                              
Buffer cache hash table entries: 16384 (order 4, 64k)                                                     
Page cache hash table entries: 4096 (order 2, 16k)                                                  
POSIX conformance testing by UNIFIX                                   
Linux NET4.0 for Linux 2.2                          
Based upon Swansea Universit                           
NET4: Linux TCP/IP 1.0 for NET4.0                                 
IP Protocols: ICMP, UDP, TCP                            
TCP: Hash tables configured (ehash 16384 bhash 16384)                                                     
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)                                               
Linux-IrDA: IrCOMM protocol ( revision:Tue May 18 03:11:39 1999 )                                                                 
ircomm_tty: virtual tty driver for IrCOMM ( revision:Wed May 26 00:49:11 1999 )                                                                               
Starting kswapd v 1.5                     
SA1100 serial driver version 4.27 with no serial options enabled                                                                
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART                                                
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART                                                
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART                                                
Signature is 206f6972 'rio '                            
empeg display initialised.                          
empeg dsp audio initialised                           
empeg dsp mixer initialised                           
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0
empeg remote control/panel button initialised.
empeg usb initialised, PDIUSBD12 id 1012
empeg state support initialised 0089/88c1 (save to d0005400).
empeg RDS driver initialised
empeg power-pic driver initialised (first boot)
RAM disk driver initialized:  16 RAM disks of 4096K size
empeg single channel IDE
Probing primary interface...
Probing primary interface...
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik at vt.edu)

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:22:07:7
6
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...VFS: Cannot open root device 03:05
Kernel panic: VFS: Unable to mount root fs on 03:05 




More information about the Empeg-technical mailing list