SplitStream Front End

[thystonius]

Daniel,
I've set mine up to run off a .bat file and pipe the output to a 
file. Here is the command I use:

splitstream %1.rawtivo %1.m2a %1.m2v %1.ty >%1_streaminfo.txt

this names all the files the same and saves all the warnings as well.

Nathan

--- In ExtractStream@y..., "Daniel" <junior15@m...> wrote:
> First, I'd like to say that this is a nice program. It made it 
easy for
> me to setup multiple ty streams to split over night. The only 
problem
> that I have with this is that it doesn't save the audio offset 
output
> from splitstream. If it does save this output, could somebody tell 
me
> where it puts the offset data? I noticed that the output does show 
up
> during the processing, but after it's done, the output disappears. 
If
> the output isn't saved, is there another easy way to tell what the
> offset is (other than guessing)?
> 
> Thanks for any help.
> Daniel
> 
> -----Original Message-----
> From: wjbode [mailto:wjbode@h...] 
> Sent: Saturday, January 19, 2002 9:53 PM
> To: ExtractStream@y...
> Subject: [ExtractStream] Re: SplitStream Front End
> 
> OK, now I have replaced the installer. It now uses the MS 
Setup 
> that comes with VB. I didn't use it before because it is huge 
(about 
> 4 times the size of the old one). Maybe they do some "magic" in 
> there that I wasn't doing in the other installer. Hopefully this 
> will allow someone to run the program.
> 
> 
> --- In ExtractStream@y..., "Mike Tuszynski" <mtuz@t...> wrote:
> > Still getting the same error depite the updates... the 429 error.
> > ----- Original Message ----- 
> > From: wjbode 
> > To: ExtractStream@y... 
> > Sent: Saturday, January 19, 2002 7:43 PM
> > Subject: [ExtractStream] Re: SplitStream Front End
> > 
> > 
> > OK, I made an update to the program. I think the error is 
> being 
> > caused by some missing DLL's from Microsoft's DAO 
distribution. 
> I 
> > added some links on my web page that go to the MS site for 
> > downloads. Please take a look at http://66.92.235.22 and let 
me 
> know 
> > if either of the files fixes the problem. Thanks!
> 
> 
> 
> To unsubscribe from this group, send an email to:
> ExtractStream-unsubscribe@y...
> 
> 
> 
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/