[Empeg-technical] Re: PCATS Tuner Not Recognized by Empeg

[mlord at empegbbs-noreply.merlins.org]

What does (the newest) Hijack say at boot time?

There should be a message line somewhere on the serial port like this:

ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is 67706d65 'empg'
Tuner: loopback=0, ID=3
Scheduling custom logo.
empeg display initialised.
empeg dsp audio initialised
empeg dsp mixer initialised