[ExtractStream] RCA inputs on tivo

[Jonathan C. Brewer]

As far as the macrovision is concerned, I'm not too
worried about that. My dvd player has a setting to turn
macrovision off. I tried hooking up a video source to the tivo
but did not understand what I needed to do in the config menu to
get an "aux1" or something where I could see the input from those
jacks. Anyone want to offer help?

-Jonathan

-----Original Message-----
From: sharkey@a...
[mailto:sharkey@a...]
Sent: Tuesday, July 10, 2001 10:58 AM
To: ExtractStream@yahoogroups.com
Subject: Re: [ExtractStream] RCA inputs on tivo 


> Has anyone attempted to play around with the RCA inputs on the back
> of the tivo vs. internal configuration?

Internal configuration?

You need to supply the tivo with some sort of video feed. It shouldn't
care where it's coming from.

> It would seem to be possible
> to hook up your VCR or DVD player to the inputs instead of a cablebox/
> directv or whatever it was meant for, to capture video from a different
> source.

This should work provided that there's no Macrovision encoding on the
tape. If there is Macrovision signal scrambling, all bets are off. It
might work, but I've never tried it, and I would tend to think that it
wouldn't. (Unless you have the hardware to repair the Macrovision signal
damage, that is.)

Eric

To unsubscribe from this group, send an email to:
ExtractStream-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/