extractstream update/test
Ken Hancock
hancockks at y...
Thu, 01 Nov 2001 04:17:25 -0000
The old modules also work as long as your rc.sysinit file loads them with
insmod -f. I got the 2.5 upgrade yesterday and after install booted back to
the other partition with runmyworld=false, handcraft=true, mounted the 2.5
partition, and copied all the directories over. Back up and running without
having to yank the drive...
--- In ExtractStream@y..., Stealth Dave <stealthdave@s...> wrote:
> 2.5.x modules for TivoNET can be found at
> http://pvrhack.sonnik.com/tivo/download.asp, but nfs and smb have not
> yet been compiled specifically for 2.5.x as far as I know. So far, Tivo
> has not yet released the source for the GPL'd 2.5.x components. When
> they do, I'm sure that someone will release 2.5.x versions of nfs and
> smb.
>
> - Stealth Dave
>
> On Wed, 2001-10-31 at 17:24, dontspammeplease@y... wrote:
> > I can tell you the 2.0.1 nfs works on 2.5. Beyond that, I'm
> > helpless... I can get the audio to play, but I have yet to see ANY
> > working video.. I just found this group though, so I am hopeful that
> > you all can help!! ;-)
> >
> > -Steve
> >
> >
> > --- In ExtractStream@y..., billyb111b@y... wrote:
> > > Dale,
> > > What are you using ot transfer from Tivo to PC? and does the -f
> > flag
> > > assume -s?
> > >
> > > Heres why I ask...
> > >
> > > If I use -f only, the output does not get directed correctly (im
> > > assuming something to do with the stdout and/or DUMP_OUT variable.
> > > If I use -s -f, the stdout sends to nc correctly, but the -f is
> > > ignored (and the first and last chunks are not ignored)
> > > If I use -f -s, its the same as the first.
> > >
> > > Do I need to set the DUMP_OUT variable? I could try NFS, but I
> > > haven't put that on 2.5 yet.. (Do the 2.0.1 modules work on 2.5.1
> > if
> > > forced or has anyone compiles NFS for 2.5 yet?)
> > >
> > > thanks
> > >
> > > bill
> > >
> > > --- In ExtractStream@y..., Dale Reed <daler@n...> wrote:
> > > > billyb111b@y... wrote:
> > > >
> > >
> > > > > Hey Dale,
> > > > >
> > > > > I tried the updated es3 last night on some new streams, and it
> > did
> > > > > what it said (skipped the first and last chunk of each set).
> > The
> > > > > problem with my setup seems to be more the just the first and
> > last
> > > > > chunk, it seems to be the first few and last few chunks, plus a
> > > few
> > > > > chunks in the middle here and there. The begining is always
> > bad,
> > > > > (from another show, usually at a different quality, which
> > messes
> > > up
> > > > > dvd2avi) beyond just the first chunk, but it seems to follow
> > > > > sequence, so SS keeps it?!?. Any way to set a range of chunks
> > to
> > > be
> > > > > exracted? Im not a programmer by any means, but Im learning.
> > > >
> > > >
> > > > Can you send me the output of -f? Something like this usually
> > > works:
> > > >
> > > > es3 -f xxxxxx 2>/var/tmp/err.log
> > > >
> > > > then ftp/copy the log from the tivo and mail to me (daler@n...
> > > >
> > > > --
> > > > Dale
> > > >
> > > > -> Philips SA Tivo 2.0.1, tivonet, tivomad 14gb->30gb (single)
>
> --
> David E. Still phone:818.980.6909
> dave@s... http://www.stilldesigning.com